DNKa' Builder Gel 

DNKa' Builder Gel - a premium quality, low-temperature gel for modeling. It has a medium consistency, spreads evenly and self-levels, making it very convenient to work with. It can be used in both one-phase and three-phase systems.

The hard gel allows for creating a strong coating, building the proper architecture, holding the arch well, and not deforming. It allows for working without dust. It is suitable for extension on lower forms, extension in techniques without/with minimal filing, correction of extension, modeling of nail plates, and nail reinforcement.

Ingredients: ACRYLATES COPOLYMER, HEMA, TRIMETHYLBENZOYL DIPHENYLPHOSPHINE OXIDE, +/- CI 77499, CI 77891, CI 15850, CI 19140.

How to use:

1. Perform standard nail preparation: remove previous coating, buff the surface, shape nails as desired, and perform a manicure.
2. Apply DNKa' Ultrabond - acid-free primer for additional adhesion.
3. Apply DNKa' Rubber/Fiber Base with rubbing motions. Cure in a UV lamp for 1 minute or in an LED/hybrid lamp for 30 seconds.
4. Cut and place the nail form under the natural nail.
5. Apply the chosen DNKa' gel in a thin, free edge-mimicking layer and cure in a UV lamp for 90 seconds or in an LED/hybrid lamp for 60 seconds.
6. Perform filing of the free edge and degrease with a degreasing agent.
7. Apply the chosen DNKa' gel in a leveling layer and cure in a lamp for 10 seconds. Then press down the arch of the nail extension and cure in a UV lamp for 90 seconds or in an LED/hybrid lamp for 60 seconds.
8. Apply DNKa' top coating and cure in a UV lamp for 90 seconds or in an LED/hybrid lamp for 60 seconds.