Your cart
There are no more items in your cart
Crystal Base is a glitter base for covering and smoothing nails.
Features:
- Weakly acidic 5-6 pH.
- Elastic and flexible.
- High level of overlap of the natural nail due to high pigmentation.
- Can give minimal shrinkage during wear due to its elasticity.
- The consistency is medium, self-leveling.
- Provides wearability without flaking for 3-4 weeks.
- It has a neutral smell.
- Eliminates strong heating of the nail plate during the polymerization process, so it does not cause burning in the lamp.
- Hypoallergenic.
- It is well removed both by sawing and by liquid.
- Does not flow and self-levels very quickly.
- Needs rubber base.
- Not suitable for straightening long nails, without prior strengthening.
- The drying time in the lamp is 120 seconds.
- You can additionally heat it to make the consistency even thinner.
- The power of the drying lamp is 48 W (it should be only the original lamp).
- The basic rule for leveling is that the thickness should be 1-1.5 mm on the end.
- Thixotropic - becomes thinner in work with brush movements.
Application method:
1. Removal.
2. We do not dust the shape of the nail. Or we leave a spare 2 mm of length, which we dust and take away after leveling.
3. With a file of 220 grit, file the nail from above without strong pressure, lifting the scales of the nail plate, or use a buff of 100 grit.
4. Manicure.
5. If you work with removers, you need to wash your hands with soap and water after using them.
6. Nail degreasing. It is necessary to make two approaches. We use 4 napkins. One napkin for 5 fingers. The first approach is to wipe the surface of the nail. The second approach is to take an orange stick, put on a napkin and wipe everything in the cuticle area and in the sinuses.
7. Dehydrator (optional)
8. We use the primer as desired. But if the base for the substrate has sufficient acidity, then a primer is not needed.
9. Lining with Rubber base Lunamoon. Best applied with a flat gel brush. Movements should be rubbing. It is important to draw all sinuses of the nail. Dry for 30 seconds.
10. Wipe off stickiness.
11. Alignment. Dry in a lamp for 120 seconds.
12. Dusting of the form after alignment. This is necessary so that a thickness is formed on the end that will hold the free edge.
13. After sawing, we wipe off the stickiness.
14. Apply top coat and dry for 120 seconds. After drying, do not wipe with anything, because the shine may be lost.
(Product photos on the website may differ from the actual product)
