Your cart
There are no more items in your cart 
DARK PLATE is a metal plate designed for creating nail art using the stamping technique. The plate features deep and precise engravings for comfortable use. A wide selection of designs allows you to easily and quickly create any pattern.
DESCRIPTION
- High-quality engraving for convenient application;
- Enables even complex designs without drawing skills;
- We recommend using together with DARK STAMPING POLISH and DARK Stamping Tool.
APPLICATION METHOD
1. Perform manicure and apply base/gel or color, cure in a lamp;
2. If there is a sticky inhibition layer, remove it with DARK GEL CLEANSER;
3. Apply polish onto the plate, use a scraper to remove the excess, and transfer the design onto the stamper;
4. Transfer the pattern from the stamper to the nail with a rolling or gentle motion;
5. Cover with a top coat (if the top coat runs off the design, apply a thin layer of clear base first, then the top coat).
WHY THE DESIGN MIGHT NOT TRANSFER TO THE STAMPER
1. The polish should not be too thick. Do not pick up too little polish on the brush; there should be enough to cover the design;
2. Apply the polish to the plate in 1-2 strokes. The longer you apply, the more likely it is to dry before stamping;
3. Use the scraper at a 45-degree angle and do not press hard to avoid pulling polish out of the design;
4. Scrape quickly (2-4 motions is enough) and do not sweep over the entire plate;
5. Immediately put the scraper down and pick up the stamper-timing is crucial when working with stamping polishes;
6. Transfer the design to the stamper with a soft rolling motion. DO NOT try to forcefully press the stamper into the plate, as more polish will remain on the plate.
