STAMPING POLISH DARK are stamping polishes that transfer easily when used correctly. They feature a wide color palette and intense pigmentation. The formula is not thick and is suitable for use with all types of stampers.

INSTRUCTIONS FOR USE

1. Perform a manicure and apply base coat/gel or color, then cure under a lamp.
2. If a sticky layer is present, remove it using DARK GEL CLEANSER.
3. Apply the polish to the plate, use a scraper to remove the excess, and transfer the design to the stamper.
4. Transfer the design from stamper to nail with a rolling or smooth motion.
5. Seal with a top coat. If the top coat slides off the design, apply a thin layer of clear base before the top coat.

1. The polish should not be thickened; pick up enough polish on the brush for even distribution over the design.
2. Apply the polish on the plate with 1-2 strokes; the longer you apply, the more likely it is to dry and produce poorer results.
3. Use the scraper at about a 45-degree angle, applying light pressure to avoid squeezing the polish out of the design.
4. Work quickly with the scraper (2-4 strokes are enough), without sweeping across the entire plate.
5. Quickly set down the scraper and pick up the stamper-time is limited when working with stamping polishes.
6. Transfer the design onto the stamper with a gentle rolling motion. Do NOT press the stamper firmly into the plate; more pressure leaves more polish in the plate.

Volume 10 ml.

IMPORTANT NOTES
Please read the instructions carefully before use. If you have allergies or individual intolerance to any component, do not use this product. In such cases, consult a physician before use.

The manufacturer may update the product formula. The latest list of ingredients is available on the product packaging.
The color shown may slightly differ from the actual product.
This is not a medicinal product.