DARK PLATE - a metal plate designed for creating designs using the 'stamping' technique. It features deep and sharp engravings for convenient work. A wide selection of designs allows you to quickly and easily create any pattern.

DESCRIPTION

• High-quality engraving for easy stamping;
• Enables even complex designs without drawing skills;
• We recommend using with DARK STAMPING POLISH and DARK Stamper for stamping.

1. Prepare manicure, apply base coat, gel, or color, and cure under a lamp;
2. If a sticky dispersion layer is present, remove it using DARK GEL CLEANSER;
3. Apply polish to the plate, remove excess with a scraper, and transfer the design onto the stamper;
4. Transfer the design from the stamper to the nail using a rolling or straight motion;
5. Finish with a top coat (if the top coat runs off the design, apply a thin layer of clear base before the top coat).

1. The polish should not be thickened; load enough polish onto the brush to cover the design;
2. Apply polish to the plate in 1-2 motions; the longer you take, the more likely it is the polish will dry and transfer poorly;
3. Work with the scraper at approximately a 45-degree angle, without applying pressure to avoid removing polish from the design;
4. Scrape quickly (2-4 motions are sufficient) and avoid sweeping across the entire plate;
5. Immediately set the scraper aside and pick up the stamper quickly (remember, with stamping polish, time is limited);
6. Pick up the design on the stamper with a gentle rolling motion; do NOT press the stamper hard into the plate-the more you press, the more polish stays in the plate.